| |
Command |
Command Description |
Command Syntax |
|
5.1.3 |
boot system |
To specify the system image that the router loads at startup, use one
of the following
boot system
global configuration commands. |
boot system file-url |
|
5.1.4 |
config-register |
This command is used to define the configuration register. The
register is a hexadecimal value from 0x0 to 0xFFFF. This command only
applies to platforms which use a software configuration register. |
config-register register-value |
|
5.2.3 |
copy running-config tftp |
To copy any file from a source to a destination, use the
copy
EXEC
command. |
copy {flash | ftp | nvram |
running-config | startup-config | system | tftp} {flash | ftp | nvram |
running-config | startup-config | system | tftp} |
|
5.2.5 |
copy flash tftp |
To copy any file from a source to a destination, use the
copy
EXEC
command. |
copy {flash | ftp | nvram | running-config | startup-config | system
| tftp} {flash | ftp | nvram | running-config | startup-config |
system | tftp} |
| |
dir flash: |
To display a list of files on a file system, use the
dir
EXEC command. |
dir [/all] [filesystem: |
file-url] |
| |
boot flash: |
Command tells the router to boot the flash device. |
boot flash
[flash-fs:] [partition-number:]
[filename] |
| |
confreg |
To change the configuration register settings while in ROM monitor
mode, use the
confreg
ROM monitor command. |
confreg [value] |
| |
xmodem |
To copy a Cisco IOS image to a router using the ROM monitor and the
Xmodem or Ymodem protocol, use the
xmodem
ROM monitor command. |
xmodem [-c][-y][-e][-f][-r][-x][-s
data-rate] [filename] |
|
5.2.7 |
tftpdnld |
Image download utility. |
|
| |
set |
Sets environmental variables |
|
| |
IP_ADDRESS |
IP address of router when in ROMmon mode. |
|
| |
IP_SUBNET_MASK |
Subnet mask of router when in ROMmon mode. |
|
| |
DEFAULT_GATEWAY |
The default gateway of router when in ROMmon mode. |
|
| |
TFTP_SERVER |
The IP address of the TFTP server that router in ROMmon mode will
download from. |
|
| |
TFTP_FILE |
The file the router in ROMmon mode will download from the TFTP server. |
|
