|
Module Overview
|
|
| 3.1 |
Spanning-Tree
Protocol Operation
|
|
| 3.2 |
STP Processes
|
3.2.1 |
STP decisions
and BPDU exchanges |
|
3.2.2 |
Three steps
of STP convergence |
|
3.2.3 |
Electing the
root bridge |
|
3.2.4 |
Electing root
ports |
|
3.2.5 |
Electing designated ports |
|
3.2.6 |
STP states |
|
3.2.7 |
STP timers |
|
3.2.8 |
BPDU format |
|
3.2.9 |
Topology changes and STP |
|
|
| 3.3 |
STP
Enhancements
|
|
| 3.4 |
802.1w Rapid
Spanning-Tree Protocol
|
|
| 3.5 |
Evolution of
Spanning Tree
|
3.5.1 |
PVST + |
|
3.5.2 |
Enhanced PVST + |
|
3.5.3 |
MST (802.1 s) |
|
3.5.4 |
Load balancing |
|
3.5.5 |
Switchport tuning using BPDU guard |
|
3.5.6 |
Switchport tuning using root guard |
|
|
| 3.6 |
STP
Configuration
|
3.6.1 |
Default STP configuration |
|
3.6.2 |
Enabling and disabling Spanning-Tree
Protocol |
|
3.6.3 |
Modifying the root bridge |
|
3.6.4 |
Setting the priority for ports and VLANs
|
|
3.6.5 |
Setting the port cost |
|
3.6.6 |
Configuring switch priority of a VLAN
|
|
3.6.7 |
Modifying default timers
|
|
|
| 3.7 |
Tuning,
Verifying, and Troubleshooting Spanning-Tree Protocol
|
3.7.1 |
Configuring PortFast |
|
3.7.2 |
Configuring UplinkFast |
|
3.7.3 |
Configuring BackboneFast |
|
3.7.4 |
Configuring BPDU guard |
|
3.7.5 |
Configuring root guard |
|
3.7.6 |
Configuring load balancing |
|
3.7.7 |
Verifying STP, RSTP, and MTSP
configuration |
|
|
| 3.8 |
RSTP and MST
Configuration
|
3.8.1 |
Default RSTP and MSTP configuration |
|
3.8.2 |
RSTP and MSTP configuration guidelines |
|
3.8.3 |
Enabling RSTP and MSTP |
|
3.8.4 |
Configuring the MST root switch |
|
3.8.5 |
Configuring MST switch priority |
|
3.8.6 |
Configuring MST path cost |
|
3.8.7 |
Configuring MST port priority |
|
3.8.8 |
Configuring MSTP timers |
|
3.8.9 |
Configuring maximum hop count |
|
|
| 3.9 |
EtherChannel
|
3.9.1 |
EtherChannel explained |
|
3.9.2 |
Frame distribution |
|
3.9.3 |
EtherChannel methods |
|
3.9.4 |
Port Aggregation Protocol (PAgP) |
|
3.9.5 |
Link Aggregation Control Protocol (LACP)
|
|
3.9.6 |
Modifying port cost for EtherChannel groups |
|
3.9.7 |
EtherChannel configuration guidelines
|
|
3.9.8 |
Configuring Fast EtherChannel |
|
|
| 3.10 |
Hands-on Lab
Exercises
|
3.10.1 |
STP default behavior |
|
3.10.2 |
Use network inspector to observe
STP behavior |
|
3.10.3 |
Advanced PVST+ configuration |
|
3.10.4 |
Implementing MST |
|
3.10.5 |
Configuring Fast EtherChannel |
|
3.10.6 |
Per-VLAN spanning tree load balancing |
|
3.10.7 |
Port level tuning to control STP behavior |
|
|
|
Module Summary
|
|
|
Module
Quiz
|
|
