|
4.3.2 |
Configuring the
ISDN Switch Type
Router(config)#isdn switch-type switch-type
|
|
4.3.3 |
Configuring the
SPIDS
Router(config-if)#isdn spid1 spid-number [ldn]
Router(config-if)#isdn spid2 spid-number [ldn]
ISDN BRI reset commands
Router#clear
interface type number
Router#isdn test disconnect interface interface-type
interface-number {b1 | b2 | all}
|
|
4.5.8 |
Enabling Snapshot
routing
Router(config-if)# snapshot server active-time [dialer]
Router(config-if)#dialer map snapshot sequence-number
dial-string]
Router(config-if)#snapshot client active-time quiet-time
[suppress-statechange-updates] [dialer]
Router(config-if)# dialer redial interval time
attempts number [re-enable disable-time]
Verifies Snapshot routing
Router#show snapshot [type number]
|
|
4.6.3 |
Multilink PPP
Router(config-if)#ppp multilink
Router(config-if)# dialer load-threshold load [outbound
| inbound | either]
Verifies multilink channels
Router#show ppp multilink
|
|
4.7.2 |
ISDN show commands
Router#show
isdn {active [dsl | serial number]
| history [dsl | serial number] |
memory | service [dsl | serial number] |
status
[dsl | serial number] | timers [dsl
| serial number]}
|
|
4.7.4 |
ISDN debug
commands
Router#debug
isdn events
|
|
4.8.3 |
Configuring the
T1/E1 Controller for PRI
Router(config)# controller t1 dial-shelf/slot/t3-port:t1-num
Router(config-controller)# framing {sf | esf} {crc4
| no-crc4} [australia]
Router(config-controller)# linecode {ami | b8zs
| hdb3}
Router(config-controller)# pri-group timeslots
timeslot-range
|
|
4.8.4 |
Additional ISDN
PRI Configuration parameters
Router(config)# interface serial slot/port:channel-group
|
