| Module
1:
Wide-Area Networks |
|
Lab:
|
1.5.1 |
Introductory
Lab 1 – Getting Started and Building Start.txt |
|
1.5.2 |
Introductory
Lab 2 – Capturing HyperTerminal and Telnet Sessions |
|
1.5.3 |
Introductory
Lab 3 – Access Control List Basics and Extended Ping |
e-Lab:
|
1.5.1 |
Getting Started and Building Start.txt |
|
1.5.3 |
Access Control List Basics and Extended Ping |
|
|
| Module 2: Modems and
Asynchronous Dialup Connections |
|
Lab:
|
2.5.1 |
Configuring
an Asynchronous Dialup Connection |
|
2.5.2 |
Configuring
an Asynchronous Dialup Connection on the AUX Port |
|
2.5.3 |
Configuring
an Asynchronous Dialup PPP |
|
|
| Module 3:
PPP Overview |
|
Lab:
|
3.7.1 |
Configuring
PPP Interactive Mode |
|
3.7.2 |
Configuring
PPP Options – Authentication and Compression |
|
3.7.3 |
Configuring
PPP Callback |
|
|
| Module 4:
ISDN and DDR |
|
Lab:
|
4.9.1 |
Configuring
ISDN BRI |
|
4.9.2 |
Configuring
Snapshot Routing |
|
4.9.3 |
Using PPP
Multilink for ISDN B Channel Aggregation |
|
4.9.4 |
Configuring
ISDN PRI |
e-Lab:
|
4.9.1 |
Configuring
ISDN BRI |
|
|
| Module
5: Dialer Profiles |
|
Lab:
|
5.3.1 |
Configuring
ISDN Using Dialer Profiles |
|
5.3.2 |
Using a
Dialer Map-Class with Dialer Profiles |
|
|
| Module
6: Frame Relay |
|
Lab:
|
6.4.1 |
Basic Frame
Relay Router and Switch Configuration |
|
6.4.2 |
Configuring
Full Mesh Frame Relay |
|
6.4.3 |
Configuring
Full Mesh Frame Relay with Subinterfaces |
|
6.4.4 |
Configuring
Hub and Spoke Frame Relay |
|
|
| Module 7:
Managing Frame Relay Traffic |
|
Lab:
|
7.3.1 |
Frame Relay
Subinterfaces and Traffic Shaping |
|
7.3.2 |
Frame Relay
Traffic Shaping with Class Based Weighted Fair Queuing |
|
|
| Module 8:
WAN Backup |
|
Lab:
|
8.7.1 |
Configuring
ISDN Dial Backup |
|
8.7.2 |
Using
Secondary Links for On-Demand Bandwidth |
|
8.7.3 |
Configuring
Dialer Backup with Dialer Profiles |
|
8.7.4 |
Configuring
DDR Backup Using BRIs and Dialer Watch |
e-Lab:
|
8.7.1 |
Configuring
ISDN Dial Backup |
|
8.7.2 |
Using
Secondary Links for On-Demand Bandwidth |
|
|
| Module
9: Managing Network Performance with Queuing and Compression |
|
Lab:
|
9.8.1 |
Managing
Network Performance Using Content-Based Weighted Fair Queuing (CBWFQ)
and Low Latency Queuing (LLQ) |
|
|
| Module
10: Scaling IP Addresses with NAT |
|
Lab:
|
10.5.1 |
Configuring
Static NAT |
|
10.5.2 |
Configuring
Static NAT |
|
10.5.3 |
Configuring
NAT Overload |
|
10.5.4 |
Configuring
TCP Load Distribution |
e-Lab:
|
10.5.1 |
Configuring
Static NAT |
|
10.5.2 |
Configuring
Static NAT |
|
10.5.3 |
Configuring
NAT Overload |
|
10.5.4 |
Configuring
TCP Load Distribution |
|
|
| Module
11: Using AAA to Scale Access Control |
|
Lab:
|
11.3.1 |
Router
Security and AAA Authentication |
|
11.3.2 |
AAA
Authorization and Accounting |
|
11.3.3 |
AAA TACACS+
Server |
|
|
| Module
12: Broadband Connections |
|
|
| Module
13: Virtual Private Networks |
|
Lab:
|
13.8.1 |
Configuring a
Site-to-Site IPSec VPN Using Pre-Shared Keys |
|
|
| Case
Study 1: Configure ISDN Connectivity between Remote Sites |
|
Lab:
| There are no
labs in this case study. |
|
|
| Case
Study 2: Configure ISDN Backup and VPN Connection |
|
Lab:
| There are no
labs in this case study. |
|
|
