| Module
1:
Campus Networks and Design Models |
| Lab: |
|
1.6.1 |
Catalyst
2950T and 3550 Series Basic Setup |
|
1.6.2 |
Catalyst
2950T and 3550 Configuration and IOS Files |
|
1.6.3 |
Catalyst
2950T and 3550 Series Password Recovery |
|
1.6.4 |
Introduction
to Fluke Network Inspector |
|
1.6.5 |
Introduction
to Fluke Protocol Expert |
|
|
e-Lab: |
|
1.6.1 |
Catalyst
2950T and 3550 Series Basic Setup |
|
1.6.2 |
Catalyst
2950T and 3550 Configuration and IOS Files |
|
1.6.3 |
Catalyst
2950T and 3550 Series Password Recovery |
|
| Module 2:
VLANs and VTP |
| Lab: |
|
2.9.1 |
Catalyst 2950T and 3550
Series Static VLANS |
|
2.9.2 |
Catalyst 2950T and 3550
Series VTP Domain and VLAN Trunking |
|
2.9.3 |
Catalyst 2950T and 3550
Series VTP Pruning |
|
2.9.4 |
Catalyst 2950 and 3550
Series Intra-VLAN Security |
|
|
e-Lab: |
|
2.9.1 |
Catalyst 2950T and 3550
Series Static VLANS |
|
2.9.2 |
Catalyst 2950T and 3550
Series VTP Domain and VLAN Trunking |
|
2.9.3 |
Catalyst 2950T and 3550
Series VTP Pruning |
|
2.9.4 |
Catalyst 2950 and 3550
Series Intra-VLAN Security |
|
| Module 3:
Spanning-Tree Protocol |
| Lab: |
|
3.10.1 |
Spanning-Tree Protocol (STP)
Default Behavior |
|
3.10.2 |
Use Network Inspector to
Observe STP Behavior |
|
3.10.3 |
Advanced PVST+
Configuration |
|
3.10.4 |
Implementing
MST |
|
3.10.5 |
Configuring Fast
EtherChannel |
|
3.10.6 |
Per-VLAN Spanning Tree
Load Balancing |
|
3.10.7 |
Port Level Tuning to
Control STP Behavior |
|
|
e-Lab: |
|
3.10.1 |
Spanning-Tree
Protocol (STP) Default Behavior |
|
3.10.3 |
Advanced PVST+
Configuration |
|
3.10.4 |
Implementing
MSTP |
|
3.10.5 |
Configuring Fast
EtherChannel |
|
3.10.6 |
Per-VLAN Spanning-Tree
Load Balancing |
|
3.10.7 |
Port Level Tuning to
Control STP Behavior |
|
| Module 4:
Inter-VLAN Routing |
| Lab: |
|
4.3.1 |
Inter-VLAN
Routing with an External Router |
|
4.3.2 |
Inter-VLAN
Routing with the Internal Route Processor |
|
4.3.3 |
Routing
Between an External Router and an Internal Route Processor |
|
| Module
5: Implementing Multilayer Switching in the Network |
| Lab: |
|
5.4.1 |
Monitoring
Cisco Express Forwarding |
|
|
e-Lab: |
|
|
| Module
6: Redundancy |
| Lab: |
|
6.5.1 |
Hot Standby
Router Protocol |
|
6.5.2 |
Multigroup
Hot Standby Router Protocol |
|
| Module 7:
Cisco AVVID |
| There are no labs in
this module. |
|
| Module 8:
Quality of Service |
| Lab: |
|
8.9.1 |
Classifying Traffic using
CoS at the Access-Layer |
|
8.9.2 |
Introduction to the
Modular QoS Command Line Interface |
|
8.9.3 |
QoS Classification and
Policing Using CAR |
|
8.9.4 |
Weighted Fair Queuing |
|
8.9.5 |
Configuring WRED on an
Interface |
|
8.9.6 |
Configuring WRED with
CBWFQ |
|
8.9.7 |
Configuring Low Latency
Queuing (LLQ) |
|
8.9.8 |
Configuring Generic
Traffic Shaping (GTS) |
|
8.9.9 |
QoS Manually Configured
Frame Relay Traffic Shaping |
|
8.9.10 |
QoS Dynamic Frame Relay
Traffic Shaping |
|
8.9.11 |
Link Fragmentation and
Interleaving |
|
8.9.12 |
QoS Compressed Real Time
Protocol |
|
|
e-Lab: |
|
8.9.1 |
Classifying Traffic using
CoS at the Access-Layer |
|
8.9.2 |
Introduction to the
Modular QoS Command Line Interface |
|
8.9.3 |
QoS
Classification and Policing Using CAR |
|
8.9.6 |
Configuring WRED with
CBWFQ |
|
8.9.8 |
Configuring
Generic Traffic Shaping (GTS) |
|
8.9.9 |
QoS Manually Configured
Frame Relay Traffic Shaping |
|
8.9.10 |
QoS Dynamic Frame Relay
Traffic Shaping |
|
8.9.11 |
Configuring Link Fragmentation and
Interleaving |
|
8.9.12 |
QoS Compressed Real Time
Protocol |
|
| Module 9:
Monitoring and Security |
| Lab: |
|
9.9.1 |
Creating a Switched Port
Analyzer (SPAN) Session |
|
9.9.2 |
Creating a VSPAN Session |
|
9.9.3 |
Creating a RSPAN Session |
|
9.9.4 |
Setting Encrypted
Passwords |
|
9.9.5 |
Using Local Usernames and
Passwords |
|
9.9.6 |
Using Advanced
Username
Options |
|
9.9.7 |
Configuring the
Management VLAN on a Single Switch |
|
9.9.8 |
Restricting Virtual
Terminal Sessions with Access Lists |
|
9.9.9 |
Restricting Web Interface
Sessions with Access Lists |
|
9.9.10 |
Configuring Protected
Ports |
|
9.9.11 |
Configuring VLAN Maps |
|
|
e-Lab: |
|
9.9.4 |
Setting Encrypted
Passwords |
|
9.9.5 |
Using Local Usernames and
Passwords |
|
9.9.6 |
Using Advanced
Username
Options |
|
9.9.7 |
Configuring the
Management VLAN on Single Switch |
|
9.9.8 |
Restricting Virtual
Terminal Sessions with Access Lists |
|
9.9.9 |
Restricting Web Interface
Sessions with Access Lists |
|
9.9.10 |
Configuring Protected
Ports |
|
9.9.11 |
Configuring VLAN Maps |
|
| Module
10: Transparent LAN Services |
| There are no labs in
this module. |
|
| Case Study 1: VLANs,
VTP, and Inter-VLAN Routing |
| There are no labs in
this case study. |
|
| Case Study 2:
Implementing QoS and Security in a Switched Network |
| There are no labs in
this case study. |
|
