| |
Command |
Command Description |
Command Syntax |
|
5.2.1 |
encapsulation frame-relay [cisco | ietf] |
To enable Frame Relay encapsulation, use the
encapsulation frame-relay
interface
configuration command. To disable Frame Relay encapsulation,
use the
no
form of this command. |
encapsulation frame-relay [cisco
| ietf] |
| |
frame-relay lmi-type [ansi | cisco | q933a] |
To select the Local Management Interface (LMI) type, use the
frame-relay lmi-type interface
configuration command. To return to the
default LMI type, use the
no
form of this command. |
frame-relay lmi-type {ansi |
cisco | q933a } |
| |
show frame-relay map |
To display the current map entries and information about the
connections, use the
show frame-relay map
EXEC command. |
show frame-relay map |
|
5.2.2 |
frame-relay map protocol protocol-address dlci [broadcast] |
To define the mapping between a destination protocol address and the
DLCI used to connect to the destination address, use the frame-relay
map interface
configuration command. Use the
no
form of this command
to delete the map entry. |
frame-relay map protocol
protocol-address dlci [broadcast] [ietf | cisco] [payload-compress
{packet-by-packet |frf9 stac [hardware-options]}] |
| |
description PVC to Dublin, DLCI 102,
Circuit #DASS465875, Contact John Tobin (061-8886745) |
To add a description to an interface, use the
description interface
configuration command. Use the
no form of this command to
remove the description. |
description string |
|
5.2.3 |
interface serial 0.102
point-to-point |
Use the
interface global
configuration command to configure an
interface type and enter interface configuration mode. |
interface
type slot/ port-adapter/port. subinterface-number
{multipoint | point-to-point} |
| |
frame-relay interface-dlci 103 |
To assign a data link connection identifier (DLCI) to a specified
Frame Relay subinterface on the router or access server, use the
frame-relay interface-dlci interface
configuration command. To remove
this assignment, use the
no
form of this command. |
frame-relay interface-dlci
dlci
[ietf | cisco] [voice-encap cir] |
| |
show frame-relay pvc |
To display statistics about PVCs for Frame Relay interfaces, use the
show frame-relay pvc
EXEC command. |
show frame-relay pvc [type
number [dlci]] |
| |
show frame-relay lmi |
To display statistics about the Local Management Interface (LMI), use
the
show frame-relay lmi
EXEC command. |
show frame-relay lmi [type
number] |
|
5.2.5 |
interface serial number. subinterface-number {multipoint |
point-
to-point} |
Use the
interface global
configuration command to configure an
interface type and enter interface configuration mode. |
interface
type slot/ port-adapter/port. subinterface-number
{multipoint | point-to-point} |
| |
frame-relay interface-dlci dlci-number |
To assign a data link connection identifier (DLCI) to a specified
Frame Relay subinterface on the router or access server, use the
frame-relay interface-dlci interface
configuration command. To remove
this assignment, use the
no
form of this command. |
frame-relay interface-dlci
dlci
[ietf | cisco] [voice-encap cir] |
|
5.2.6 |
show frame-relay map |
To display the current map entries and information about the
connections, use the
show frame-relay map
EXEC command. |
show frame-relay map |
| |
clear frame-relay-inarp |
Clears dynamically created Frame Relay maps, which are created by the
use of Inverse ARP. |
clear frame-relay-inarp
|
|
5.2.7 |
debug frame-relay lmi |
Determines whether the router and the Frame Relay switch are sending
and receiving LMI packets properly. |
debug frame-relay lmi |
